Acro Laps For High Speed Lapping/Polishing/Deburring-1-1-2-TH

Barrel: 1-1/2″

Features:

• Acro laps insure fast, accurate lapping of long or short holes, 1/8″ to 1-1/2″ diameters.
• Instantly, accurately adjustable. Milled eccentric slots in brass barrel permit expansion of up to 15 or more by simply turning adjusting screw.
• No set-up time. No special equipment needed.
• Replacement parts, arbors, brass barrels and adjusting screws are available from stock.

Barrel Laps:

• Acrolap Barrel Laps insure fast, accurate lapping of long, or short hole through hole applications 1/8″ to 1-1/2″, or 3mm to 25mm Diameters.
• Expansion of about 15%, or more by simply turning adjustment screw with wrench.

Blind Hole Laps:

• Blind Hole Laps are designed to accurately lap “closed end” holes from 1/8″ to 1-1/4″ Diameters.
• With the same slotted feature as the Barrel Lap, Blind hole Laps permit high-speed lapping without galling, or seizing.
• Holes are precision lapped from top of hole to bottom.
• Recessed adjustment screw in end of cylinder permits lap to reach the very bottom of hole, and is adjusted by turning with hex key.

See all Acro Laps For High Speed Lapping/Polishing/Deburring