Welcome to our store!
Welcome to our store!
Customer Support [email protected]

Sapele African Ribbon Mahogany Wood Veneer 15″ x 11″ raw no Backing 1/42″

$15.00 $9.00

Brand: JSO Wood ProductsFeatures: Model: African Ribbon Mahogany (Sapele) veneer flitch, Veneer Type: RawBrand: African Ribbon Mahogany (Sapele) wood rawVeneer Cut: Quarter CutItem Type: Veneer SheetDetails: African Ribbon Mahogany Sapele wood veneer 15" x


SKU: DZF424215778536 Category:

Brand: JSO Wood Products

Features:

  • Model: African Ribbon Mahogany (Sapele) veneer flitch, Veneer Type: Raw
  • Brand: African Ribbon Mahogany (Sapele) wood raw
  • Veneer Cut: Quarter Cut
  • Item Type: Veneer Sheet

Details: African Ribbon Mahogany Sapele wood veneer 15″ x 11″ with no backing raw veneer 1/42 thickness A grade quality. Quartered straighter grain runs shorter direction. Ships flat in between cardboard.
First photo has light coat of clear finish to show likely color and grain when finished. Results may vary. Product is unfinished veneer as shown in second photo. Other sizes, backed veneer and edgebanding preglued and nonglued are available. Faster available.
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
About pictures
: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added (raw veneers are typically not wet). Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
Backed products
come with complete application instructions
that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness
: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40
Wood-backed veneers = 1/25
Raw plain veneer with no backing = 1/32-1/42
How to cut
: generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply
: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish
: most any conventional finishing products can be used with veneer that is applied correctly.

Disclaimer:
Someti

EAN: 7426853684502

Reviews

There are no reviews yet.

Be the first to review “Sapele African Ribbon Mahogany Wood Veneer 15″ x 11″ raw no Backing 1/42″”

Your email address will not be published. Required fields are marked *

Related products